appendix : adding proof of ident results

rapport/appendices.tex

@@ -1,7 +1,57 @@
 \clearpage
 \pagenumbering{arabic}% resets `page` counter to 1
-\renewcommand*{\thepage}{A-\arabic{page}}
+\renewcommand*{\thepage}{S-\arabic{page}}
 \appendix
+
+\chapter{Supplementary for~\nameref{chap:struct-detection}}
+\section{Proof of the idenfiability result}
+\label{sec:proof-identifiability}
+
+We recall the following
+\def\thetheorem{\ref{thm:identifiability-iid}}
+\begin{theorem}[Identifiability of $iid$-colBiSBM]
+    The parameters $(\bm{\pi}, \bm{\rho}, \bm{\alpha})$ are
+    identifiable up to a label switching of the blocks if those
+    conditions are achieved:
+    \begin{itemize}
+        \item[(1.1)] $\exists m^*\in\{1,\dots,M\} : n^1_{m^*} \geq 2 Q_2 - 1~\text{and}~n^2_{m^*} \geq 2 Q_1 - 1$.
+        \item[(1.2)] $\forall 1\leq q \leq Q_1, \pi_q > 0$
+            and the coordinates of vector $\bm{\rho}
+                {X^{m^*}}^T$ are distinct (where ${X^{m^*}}^T$ is the transpose of $X^{m^*}$).
+        \item[(1.3)] $\forall 1\leq r \leq Q_2, \rho_r > 0$
+            and the coordinates of vector $\bm{\pi}
+                X^{m^*}$ are distinct.
+    \end{itemize}
+\end{theorem}
+\begin{proof}
+    Following the tracks of~\cite{chabert-liddellLearningCommonStructures2024a}
+    we derive the result in Properties~\ref{thm:identifiability-iid}.
+
+    \cite{keribinEstimationSelectionLatent2015} building
+    on~\cite{celisseConsistencyMaximumlikelihoodVariational2012}, proved that the
+    parameters $(\bm{\pi}, \bm{\rho}, \bm{\alpha})$ of the
+    $\mathcal{F}\text{-BiSBM}_{n_1^m,n_2^m}(Q_1^m, Q_2^m, \bm{\pi^m}, \bm{\rho^m}, \bm{\alpha^m})$
+    are identifiable from the observation of network $X^m$ when $\mathcal{F}$
+    is the Bernoulli distribution and the following conditions are met:
+    \begin{enumerate}
+        \item $ n_1^m \geq 2 Q_2^m - 1~\text{and}~n_2^m \geq 2 Q_1^m - 1$.
+        \item $\forall 1\leq q \leq Q_1^m, \pi_q^m > 0$
+              and the coordinates of vector $\bm{\rho^m}
+                  {X^{m^*}}^T$ are distinct (where ${X^{m^*}}^T$ is the transpose of $X^{m^*}$).
+        \item $\forall 1\leq r \leq Q_2^m, \rho_r^m > 0$
+              and the coordinates of vector $\bm{\pi^m}
+                  X^{m^*}$ are distinct.
+    \end{enumerate}
+
+    Under the \emph{iid}-colBiSBM model, for all $m=1\dots M$,
+    $X^m \sim \mathcal{F}\text{-BiSBM}_{n_1^m,n_2^m}(Q_1, Q_2,
+        \bm{\pi}, \bm{\rho}, \bm{\alpha})$. This means that
+    following~\cite{keribinEstimationSelectionLatent2015}, the
+    identifiability of $\bm{\alpha}$, $\bm{\pi}$ and $\bm{\rho}$ is obtained
+    from the distribution of $X^{m^*}$ under assumptions (1.1), (1.2) and
+    (1.3).
+\end{proof}
+
 \chapter{Supplementary for~\nameref{chap:simulation-studies}}
 Below are the supplementary material for the~\nameref{chap:simulation-studies}.
 
@@ -31,14 +81,18 @@ Please note that blank space indicates that among all conditions
 the corresponding model was not selected at all.
 
 \begin{landscape}
-    \pagestyle{empty}
     \input{../tables/simulations/model_selection/model-selection.tex}
 \end{landscape}
-\pagestyle{fancy}
+
+
 
 \chapter{Supplementary for~\nameref{chap:applications-ecological-networks}}
 \section{Additional information on~\nameref{sec:baldock-clustering}}
 
+\fancypagestyle{fancy}
+
+\renewcommand*{\thepage}{S-\arabic{page}}
+
 Due to report size limitations we included these plots here as they are not crucial to understand what is going on in
 the section~\ref{sec:baldock-clustering}.
 Yet they are useful to confirm the explanation given.

rapport/chapter3-structure-detection.tex

@@ -1,5 +1,6 @@
 \addtocounter{customchapter}{1}
 \chapter[Structure detection in bipartite collection]{Structure detection in a collection of bipartite networks}
+\label{chap:struct-detection}
 \section{Definition of a collection}
 \label{sec:definition-of-a-collection}
 
@@ -708,7 +709,7 @@ And the pairwise dissimilarity for networks $(m,m')\in\mathcal{M}^2$ is then:
 
 \begin{figure}[t]
     \centering
-    \begin{tikzpicture}
+    \begin{tikzpicture}[scale=0.7]
         \tikzstyle{instruct}=[font=\small, text justified, rectangle,draw,fill=yellow!50]
         \tikzstyle{first_col}=[rectangle, text justified, draw,fill=gray!50]
         \tikzstyle{second_col}=[scale=0.55, circle, draw,fill=red!50]
@@ -751,12 +752,10 @@ trivial partition in a unique group.
 Then using the \emph{Kmeans} we split the collection in two sub-collections
 with the dissimilarity matrix. The two sub-collections are fitted and we
 compute the score of this new partition $\mathcal{G}^{*} = \{G_1, G_2\}$.
-
 If $Sc(\mathcal{G}^{*}) > Sc(\mathcal{G})$ then we repeat the same procedure on
 $G_1$ and $G_2$. Else we return $\mathcal{G}$.
-
 We illustrate our capacity to perform a partition of a collection for all
-colBiSBM models in %\ref{sec:network-clustering-of-simulated-networks}.
+colBiSBM models in~\ref{sec:network-clustering-of-simulated-networks}.
 
 \section{Model identifiability}
 \label{sec:model-identifiability}
@@ -764,7 +763,7 @@ colBiSBM models in %\ref{sec:network-clustering-of-simulated-networks}.
 The goal here is to prove that if $\ell(\bm{X};\bm{\theta}) = \ell(\bm{X};\bm{\theta}')$ for any collection $\bm{X}$ then $\bm{\theta} = \bm{\theta}'$.
 
 Following the proof proposed by~\cite{chabert-liddellLearningCommonStructures2024a}, that adapted it to the collection case and~\cite{keribinEstimationSelectionLatent2015} that extended the result of~\cite{celisseConsistencyMaximumlikelihoodVariational2012} to the LBM Bernoulli model,
-we obtain the following proof of identifiability for the $iid$-colBiSBM:
+we obtain the following result of identifiability\footnote{The proof is in appendix. \ref{sec:proof-identifiability}} for the $iid$-colBiSBM:
 \begin{theorem}[Identifiability of $iid$-colBiSBM]
     \label{thm:identifiability-iid}
     The parameters $(\bm{\pi}, \bm{\rho}, \bm{\alpha})$ are

rapport/rapport.tex

@@ -26,7 +26,7 @@
 	hypertexnames=true
 }
 
-\newtheorem{theorem}{Theorem}
+\newtheorem{theorem}{Properties}
 \usepackage{tocbibind} % Pour avoir des index pour table des matières, biblio
 \usepackage{geometry}
 \geometry{bmargin=25mm}